Home
Home



Site Map
Site Map








Go

Home
Products Technology News Contact Us About Chomerics
Products

EMI Products

Corrosion Resistant Gaskets

 

CHO-SEAL® 6502 & 6503

Stable Corrosion Resistant EMI Shielding Gaskets
Nickel plated Aluminum (Ni/Al) Filled Silicone & Fluorosilicone

CHO-SEAL® Ni/Al materials provide the highest shielding effectiveness after long term aging testing of any EMI shielding elastomer gasket material. Ni/Al filled elastomers have the highest reliability, lowest need for field service and reduced warranty needs, reducing costs by 30 to 40%

Ni/Al particles have low transfer impedance (Per SAE ARP 1705). They are both inherently stable and have the best galvanic compatibility with Al flanges. This combination delivers the best durability and
stability. Ni/Al particle filled elastomers provide the lowest amount of flange pitting due to galvanic corrosion. CHO-SEAL Ni/Al materials reduce flange pitting on all chromate treated flanges as compared to Ag/Al filled materials by 20 to 50%. Gasket designs for use in uncontrolled environments can avoid:


• Ni or Sn plating of Al flanges and housings
• Secondary outboard nonconductive gaskets
• Secondary outer enclosures
• Complicated partial flange painting

These eliminations can reduce the cost of a durable EMI gasket system up to 45%.



Download Data Sheet (.pdf)
Request a Sample

Test Reports
An Evaluation of the Transfer Impedance of CHO-SEAL®® Shielded Elastomers. PER CHO-TP10 (.pdf)
An Evaluation of the Shielding Effectiveness of CHO-SEAL®® EMI Shielding Elastomers. PER CHO-TP09 (.pdf)
Galvanic Corrosion After 504 Hours of Salt Fog for CHO-SEAL® 6502, 6503, 1298, 1285, L6303 and 6370 (.pdf)

 

 

CHO-SEALŪ 1298 conductive elastomer gaskets incorporate unique particle plating and elastomer technology for increased corrosion resistance. This gasket material is based on a silver-plated-aluminum filler dispersed in a fluorosilicone binder, with corrosion inhibiting additives that contain no chromates. It offers shielding effectiveness of 100 dB at 500 MHz and meets all requirements of MIL-G-83528 Type D (initial and aged).

Download Datasheet (.pdf)
Request a Sample

Typical Applications

Related Products

   


Overview

Product Family
Case Studies